How To Connect Set Top Box To Dvd Player

Download Article

Download Article

This wikiHow teaches you how to connect a DVD player, VCR, and digital cable box to your telly using the best possible connections.

1. 1

   Bank check your Telly's inputs. On the back or side of your Television receiver, there will be several ports to which you can attach cables. Depending on your TV'south age and model, yous should run across some (or all) of the post-obit:

   • RCA - Red, yellow, and white round ports. These are most often seen on VCRs, DVD players, and older consoles.
   • HDMI - A flat, wide input used for high-definition appliances. Your TV may have more than one of these.
   • South-video - A circular piece of plastic with several small holes in it. This input is platonic for getting optimal quality for older applied science, such as VCRs or old DVD players. Due south-video doesn't carry sound, so you'll need the cherry-red and white cables from the RCA cablevision set if you're hooking upward a DVD histrion or VCR.

2. 2

   Check the outputs on your DVD player, VCR, and cablevision box. The options that you have for connecting your items to your TV will determine the type of connection that you utilize:

   • DVD actor - Commonly RCA, s-video, and/or HDMI.
   • VCR - RCA and/or s-video.
   • Cable box - HDMI, though some quondam cablevision boxes accept RCA outputs.

   Advertisement

3. 3

   Decide which items you want to prioritize. When it comes to image quality, your DVD player and your cablevision box should accept priority over the VCR. This means that y'all'll most probable want to apply an HDMI cable for both if possible, leaving either RCA or due south-video connectedness for your VCR.

   • If your TV but has one HDMI input, you'll probably want to connect the cable box to information technology and use a different cable blazon for the DVD player.
   • If you have a receiver that hooks up to your TV's HDMI input, you may be able to connect both the DVD player and the cable box to the receiver via HDMI.

4. four

   Become the right cables for each item. This will largely depend on the types (and number) of connections that your Tv has:

   • DVD player - Ideally, yous'll apply HDMI if information technology's available. If non, use RCA cables or s-video cables. Since your DVDs will be higher-quality than your VHS tapes, use s-video hither instead of for the VCR if necessary.
   • VCR - You'll want to use either RCA cables or due south-video cables for your VCR. This volition ordinarily depend on what you're using for your DVD thespian.
   • Cable box - Y'all'll demand an HDMI cable to adhere the cable box to the TV, likewise as a coaxial cable to connect the box to the cable service.

5. five

   Buy any cables that y'all don't take. Most DVD players, VCRs, and cable boxes will come with the cables that y'all need to use; nevertheless, if yous're using s-video or HDMI on a box that came with RCA, you'll demand to purchase the correct cables online or in a tech section shop.

   • If you're buying an due south-video cable, make sure that you purchase the right one.
   • When buying cables, don't worry near getting the most expensive one that you can observe. Practiced HDMI or s-video cables shouldn't run you more than $fifteen to $20 depending on where you shop (online is typically the cheapest).

6. 6

   Turn off and unplug your Tv. Your Boob tube must be turned off and unplugged from its power source before you lot tin can connect your items.

   Advertizement

1. i

   Find your DVD player'south connector cablevision. You should be using either an HDMI cablevision or an s-video cable for your DVD player.

   • If you're using an s-video cablevision for your DVD actor, y'all'll also need the cerise and white RCA cables.

2. 2

   Attach your cablevision to your DVD player. Plug the HDMI or s-video cable into the appropriately labeled port on the back of the DVD player.

   • If yous're using an s-video cablevision, yous'll also need to plug the crimson and white RCA cables into the ruby and white ports on the dorsum of the DVD role player.

3. 3

   Plug the cable into the TV. Insert the other terminate of the HDMI or s-video cable into the dorsum or side of the Tv set. Y'all'll also need to plug the red and white RCA cables into the cherry-red and white ports on the back of the Telly if you're using s-video.

   • If y'all use a receiver for your TV, y'all may be able to use your receiver's inputs instead of your TV'due south.

4. iv

   Connect your DVD actor to a power outlet. Plug the DVD role player's power cablevision into an electrical socket. This can exist a wall socket or a socket in a surge protector.

   Advertisement

1. 1

   Find your VCR's connector cables. If you're using an s-video cable, you'll too need the cerise and white RCA cables that are typically congenital into the VCR. If non, simply use all three of the RCA cables (the blood-red, white, and yellow cables).

2. 2

   Attach your cables to the VCR. Plug the s-video cablevision into the back of the VCR. RCA cables are usually built into the VCR; if yours aren't, plug at least the red and white cables into the red and white ports on the back of the VCR.

   • If y'all aren't using southward-video cables, brand sure that the yellowish RCA cablevision is also attached to the VCR.

3. 3

   Plug the other ends of the cables into the Television receiver. Plug the gratuitous end of the s-video cablevision into the "S-Video In" slot on the dorsum or side of the TV, and so plug the red and white cables into the ruby-red and white ports on the back or side of the TV.

   • If you employ a receiver for your TV, yous may be able to employ your receiver's inputs instead of your Television receiver'south.

4. 4

   Connect your DVD player to a power source. Plug the DVD thespian'southward power cable into an electrical outlet, exist information technology a wall socket or a surge protector.

   • If the DVD player's cable is detached from the player itself, you'll need to attach the cablevision to the back of the DVD player too.

   Advertising

1. 1

   Find your cablevision box's cables. You'll need at least three cables for your box: the coaxial cable, the HDMI cablevision, and the ability cable.

2. ii

   Attach the coaxial cable to the cablevision box. The coaxial input on your cablevision box resembles a metal cylinder with a hole in the middle and screw threads, while the coaxial cablevision has an attachment resembling a needle. Plug the needle into the eye of the coaxial input, then screw the head of the cable clockwise to tighten the connection.

3. 3

   Attach the other end of the coaxial cable to the cable output. On the wall behind your Telly, you should have a coaxial output that looks similar to the one on the dorsum of your cable box. Attach the coaxial cable to this output the same way that you lot fastened information technology to the cable box.

   • If the coaxial output is elsewhere in the room, you may need to get a longer coaxial cable and run it the length of the room.

4. 4

   Plug your HDMI cablevision into the cable box. Find the "HDMI OUT" (or similarly labelled) slot on the dorsum of the cable box and plug one end of the HDMI cable into information technology.

5. 5

   Plug the other end of the HDMI cable into your TV. If you only take one HDMI port on the back or side of your Idiot box, make certain that you're using it for your cable box.

   • If you employ a receiver for your Tv set, yous may be able to apply your receiver'due south HDMI input instead of your TV's.

6. 6

   Connect your cable box to a ability source. Plug one end of the power cable into an electrical outlet (east.g., a wall socket or a surge protector), so plug the other finish into your cable box.

   Advertizing

Add together New Question

• Question

  I take a 5.1 environs sound system. I can get the DVD and tuner to play and become sound through the system. What I can't get is sound from my Tv set when using the surround sound. What should I do?

  

  You can't use both at the same fourth dimension with the to the lowest degree corporeality of cables. If you're using all digital connections and accept a digital Telly that has a digital audio output, then run both the DVD and the tuner to the TV. So connect the digital audio output on the Boob tube to the receiver. When the receiver is off, the audio volition come from the TV.

• Question

  What is incorrect if my VCR will play, but non record?

  

  Effort using the tape button on both the remote or the front of the VCR. If neither one works, so the recording equipment in the VCR has malfunctioned. (Notwithstanding, the recording equipment is not required to play a VHS tape.)

• Question

  I desire to connect a DVD histrion using my cable box. I don't have access to connecting DVD direct to TV, and need to go through the cable box. Is this possible? Or practise I need to buy a tuner to brand the connections?

  

  Some cable boxes have auxiliary inputs into which y'all could plug your DVD. Besides, some DVD players have auxiliary inputs to which yous tin can connect the cable box, then feed it through to the Boob tube.

• Question

  What can cause my DVD/VCR combo to not have audio?

  

  Check your audio jacks and their respective color coded plugs, sometimes they are slightly different and matches for the colors are not constitute, in this case just read both the DVD/VCR combo owner'due south manual, and your television's transmission as well to determine their corresponding audio plugs. In some cases the cord may have cracked internal wiring. In social club to avoid this, do not place any permanent wires in a identify where they may be damaged, and don't wrap them upward too tight. The jack may as well be corroded. Use WD-40 later on you've disconnected all potential power sources.

• Question

  Volition I be able to plan the VCR to record TV channels?

  

  No, you need to use the cable box to tape TV, unless the cable box is somehow fed through the VCR.

• Question

  How do I connect a VCR to an old TV with a cable box?

  

  If yous want the cable to VCR to TV, then connect the cable box to the VCR with either an coax (standard cablevision line) or composite (red, white, yellow) to the input on the dorsum. Then run a coax or blended cable from the output on the dorsum of the VCR to the input on the TV.

• Question

  Can I change the ends on a HDMI cord?

  

  If you're talking well-nigh cutting the end off and changing the end of the HDMI cord to a different type of cord like a S-Video, coax, composite, component, etc., then it's out of the question. Withal, you lot can buy a usually small box that comes with a power cord that allows yous to connect an HDMI string.

• Question

  What kind of splitter do I need to connect a blu-ray role player to a high definition Tv set that merely has one HDMI input?

  

  You don't need a splitter to connect i device. If you're connecting two devices, then y'all need an HDMI selector (a minor box with two HDMI ins and one HDMI out).

• Question

  How do I connect my DVD player if my TV has only one connectedness and it'south used for my cablevision?

  

  Some cable boxes offer the pick of connecting some other input. If yours doesn't, then you tin can buy a small switch box that has an A and B selector on information technology. Information technology offers the choice of two inputs to one output, and you can choose A or B to cull which device you lot want to play.

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

• When using RCA cables, remember the following: blood-red is for the right audio channel, white is for the left audio aqueduct, and yellow is for video. Knowing this will help you diagnose sound or video issues if they arise.

• You lot should e'er place a VCR at the bottom of the quality prototype. DVDs accept much college possible quality than do VHS tapes, and your cable box should always be connected to an HDMI input by default.

Advertisement

• Always make certain that your Boob tube is off and unplugged when changing inputs for your items.

• Placing too many components (due east.grand., DVD players, VCRs, cable boxes, consoles, etc.) in proximity can lead to overheating.

Advertisement

Almost This Article

Thanks to all authors for creating a page that has been read 922,937 times.

Is this article upward to engagement?

How To Connect Set Top Box To Dvd Player,

Source: https://www.wikihow.com/Connect-a-DVD-Player%2C-VCR%2C-and-Digital-Cable-Box

Posted by: beckrikeproseet.blogspot.com

Share this post